Home
beautiful living for generations

Blog

 

To view a list of trade shows and other events, visit our events page. 

 

1/8/2014

This is part two of a series of short articles exploring the damage severe weather can wreak and how Innotech windows and doors help prevent or mitigate that damage. For part one please click here.

 

 

Alberta Flooding Damage

 

 

Part one of the “Defending Against Mother Nature” series explored the importance of a window and door’s impact resistance; a high-quality insulated glass unit with high performance glass and protective coatings play a critical role in keeping severe weather at bay. But, in the face of high winds, powerful storms, and flooding conditions, a window or door’s glass is only as good as the frame and hardware that surround it. Not only do they contribute to impact resistance, they are crucial to the air and water tightness of the entire window and door.

 

As stated in part one, the first job of a window or door is to keep bad weather where it belongs – outside! Rain or flood waters can cause extensive damage to a home, and air leakage can lead to dangerous pressure differential situations (not to mention cost you an arm and a leg in energy costs!). A window and door must maintain the integrity of the building envelope because as soon as there is ingress of air or water then the energy and repair bills start piling up: the more leaks, the higher the bills!

 


 

High winds in powerful storms can produce catastrophic results, but even slight air leakage can have a negative effect on the comfort and energy efficiency of a home. At wind speeds as low as 25mph a poorly built window can fail, with the wind driving cold air and damaging water into the home. Let's face it: if air can get in, so too can water. 

 


So what does it take to build a leak-resistant window and door frame? First, it needs to be resilient. The best windows and doors utilize some type of engineered reinforcement system to help maintain integrity during extreme conditions. The stronger the reinforcement the better, with the best being high-grade steel integrally bonded to the frame.

 

 Steel and uPVC Windows and Doors

 

 

 

 

 

 

 

 

 

 

 

 

 

Next, the window or door frames should not have any joints where air or water can intrude. This presents a problem at a window or door’s corners; how can two intersecting pieces be joined without a seam? Glues, sealants and conventional welding can be a viable solution, but the best option is something called fusion welding, whereby the adjoining pieces are actually melted together. Welded joints, especially of thicker uPVC profiles, are stronger than mechanical joints and are completely airtight and watertight. Unlike aluminum, fiberglass, and low quality vinyl windows and doors that rely on sealants and can work loose or leak, fusion welding eliminates one of the major pathways of air and water penetration into building walls.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Most familiar to homeowners is after market weatherstripping; this is what people often think of when they consider a window or door frame’s air and water tightness. However, an air and water tight system will have integral weather seals within its frame; a crucial defense against air and water, especially when multiple seals are used at once.

 

Hardware plays a very important role in air and water tightness. Ill-fitting or poorly engineered handles and locks are potential entry points for air and water, an intrusion that will surely find its way into the building envelope. The best hardware precisely aligns to mating surfaces to maintain contact in all weather conditions and adjusts along three axes to compensate for minor settlement and wear.

 

Finally, it’s not just how a window or door is made that determines its air and water tightness, but also how it’s installed in the building envelope. In a recent study conducted by the Alberta Municipal Affairs and the City of Calgary, the main reasons for water intrusion - also known as building envelope failure - in both single and multi-family homes are related to "poor construction practices and trade skills, lack of accountability within the building industry and insufficient or ineffective inspections/enforcement by municipal authorities" (source). Taking time to read and follow the manufacturer's installation instructions can significantly improve the air and water resistance of the installed window and door.

 

Put all of these elements together - a very strong framing system, multiple weather seals, high-quality hardware and proper installation - and your windows and doors are in a much better position to defend your home against Mother Nature. Watch the video below to see how a high quality Innotech window handles extreme weather conditions.

 

 

 

When you combine integral steel reinforcement, fusion corner welding construction, high quality multipoint locking hardware, triple and continuous seal technology, and good installation, you get windows and doors that will resist costly and dangerous air and water intrusion. 

 

+ Learn more about our Hybrid Framing System and our Defender Hardware System

+ Click here to read Part 3 of this series

CATEGORY:
11/22/2013

This is part one of a series of short articles exploring the damage severe weather can wreak and how Innotech windows and doors help prevent or mitigate that damage. 

 

Rain Storm 

 

2013 will be a year long remembered for its severe weather. Mother Nature was at her destructive worst, causing damage to homes all around the world. Hurricanes, tropical depressions, high wind storms, and swollen rivers all contributed to a frightful year for homeowners. Perhaps most significant to Canadians were the massive floods that struck Albertans, specifically those in Calgary and High River, and caused a staggering amount of damage; the Insurance Bureau of Canada has called it the costliest disaster in Canadian history.

 

With the destructive power of Mother Nature regularly reported in the media, it’s natural to wonder what steps a homeowner can take to protect their possessions and their family. It surprises many to find out that windows and doors play a major role in keeping Mother Nature at bay.

 

The first step to preventing damage is to ensure that bad weather stays where it belongs – outside! To do this, windows and doors must be constructed with three important characteristics in mind:

 

  1. Structural and Impact Resistance
  2. Air and Water Tightness
  3. Window Placement

 

This article will deal with the first item, structural and impact resistance, and subsequent blogs in this series will tackle the others. 

 

The Importance of Impact Resistance

A window’s ability to resist impacts is critical to preventing weather damage to a home, but the reasons for this may come as a surprise.

 

Strong winds in a hurricane or powerful storm can carry debris through the air at high speeds. The danger of debris flying through the window, along with the shattered glass, is significant in itself, but so too is the pressure differential that is created when a window burst open. If you’ve ever seen pictures of a home that’s had its roof blown off in a storm, you might have thought it was just ripped off by the wind. In reality, it’s often broken windows or forcefully opened doors that allow air pressure to build up inside, increasing the likelihood of roof failure. By protecting against impacts a well-engineered window and door can help prevent the pressure differential that is so dangerous to homes.

 

Likewise, rocks and other debris carried by flood waters pose significant dangers to a home. A failed window, especially a basement egress window, will allow the interior to become flooded with mud and water. Windows designed and built to withstand impacts can help keep a home protected during a flood by maintaining their structural integrity, keeping the water out. 

 

What Makes a Window Impact Resistant?

Impact resistance is a product of a window or door’s frame construction, its operating and locking hardware, the quality of the insulated glass unit within that frame, and the thickness and types of coatings of the glass. When all of these components are engineered to work together, a window or door can achieve high impact resistance - helping defend your home.

 

The video below includes a demonstration of the kind of force that Mother Nature can throw at a home, and the types of windows that help protect homeowners and their families. Filmed on location in Innotech’s testing facility, using actual Innotech products, the video documents two separate tests; an impact test consisting of a two-by-four being fired at the window, followed by a pressure test which sucks in and then pushes out the glass, replicating the pressure changes that take place during a storm. 

 

 

The glass in our windows and doors is supplied by Cardinal Glass, the world's premiere supplier of high performance insulated glass units. Not only do we utilize the best glass vendor in the industry, but the glass used in Innotech products is on average 25-50% thicker than other manufacturers. This top quality glass works in concert with Innotech's German engineered Hybrid Framing System and Defender Hardware System to provide superior impact protection.

 

As the video demonstrates, a well-engineered window and door can protect your home from high winds, driving rain and hurricane conditions. By ensuring your windows and doors are built to withstand impacts, you can help defend your home and your family against nature’s destructive power. 

 

+ To learn more about the anatomy of an Innotech window, click here

+ To learn more about the safety coating options offered by Innotech, click here

+ Click here to read part 2 of this series

 

CATEGORY:
11/12/2013

Tilt and Turn WindowsOne of the best parts of the US Department of Energy Solar Decathlon's competition is seeing all of the different sustainable building technologies and products used in the construction of each of the homes. We'll admit that the first building component we look at are the windows and doors - after all, this is a competition that's all about the best of the best in sustainable construction!

 

This past October at the 2013 Solar Decathlon, two our staffers had the opportunity to go to California to tour the 19 entries in the competition. We were pleased to see that about half of the homes featured European-style windows and doors.

 

Of course, the three European teams, including the winning team Team Austria from Vienna University of Technology, all had tilt and turn windows and high-performance exterior doors, but many of the North American teams also opted for European windows and doors - most likely because of their excellent air, water, sound and structural ratings.

 

It's great to see more and more discerning building professionals - even our up and coming ones - specify high-performance fenestration for their projects. 

 

Learn more about the Tilt + Turn Advantage and Team Alberta's entry Borealis.

 

 

CATEGORY:
11/3/2013

Innotech Windows Fraser Shipyards Under Construction Fraser Shipyards, Superior, Wisconsin

 

The Fraser Shipyards in Superior Wisconsin have seen their fair share of amazing engineering, what with Coast Guard cutters, massive container ships, and huge barges all spending time in their docks.

 

This past July, the growing shipyard broke ground on their new expanded offices on Lake Superior's waterfront and Innotech was chosen to supply our high performance windows, adding our fenestration engineering to compliment the nautical variety. The project features 67 openings, which are filled with double glazed fixed windows, spectacularly dressed in our charcoal exterior and white interior. 

 

Scheduled to be completed in the coming weeks, we'll be sharing more photos of this amazing project once it's finished. For now, follow the link below to enjoy a selection of progress pictures provided by Fraser, and be sure to follow us on Facebook for more updates about the project!

 

+ View all the construction photos on Fraser Shipyards' Facebook page

CATEGORY:
10/15/2013

We would like to extend a huge congratulations to Team Alberta for placing 9th at the US Department of Energy Solar Decathlon 2013. In what was the tightest competition in the Solar Decathlon's history, Team Alberta earned an impressive 913 points out of a total of 1000 possible points. The very close competition was a reflection of all of the quality homes displayed in California.

Team Alberta Solar Decathlon 2013, Borealis 

Team Alberta designed and built a modular, net-zero home named Borealis for this year's Solar Decathlon. The affordable, comfortable and energy efficient home was built in response to the immediate need for housing for the resource industry working in remote areas of Western Canada. + Read more about Borealis here

 

The winner of the Solar Decathlon is the team that best blends affordability, consumer appeal, and design excellent with optimal production and maximum efficiency. The winner of this year's tight competition was Team Austria from the Vienna University of Technology. Congrats to Team Austria!

 

During the ten day competition, Director of Business Development at Innotech George Nickel and Director of Sales from Fentro Technologies Henry Nickel went to California to support Team Alberta and take part in some of the Solar Decathlon's festivities. Here are some of our favourite photos: 

 

An arial photo from Orange County Great Park in Irvine, California where the 19 competing teams re-constructed their homes for the competition:

2013 Solar Decathlon, Irvine California

 

The entrance to the US Department of Energy Solar Decathlon 2013:

US Department of Energy Solar Decathlon 2013 

 

Below right: Team Alberta's Project Manager Alexandre inviting us into Borealis. Below left: Neal from Team Alberta with George from Innotech. 

US Department of Energy Solar Decathlon 2013 2013 Solar Decathlon, Borealis

 

The back of Team Alberta's t-shirts showing all of the sponsors of Borealis: 

2013 Solar Decathlon, Borealis 

 

The front and back of Borealis by Team Alberta:

2013 Solar Decathlon, Borealis

2013 Solar Decathlon, Borealis

 

A view of our high-performance Tilt and Turn Doors with our contemporary pleated shades. We also love the kitchen table made with reclaimed wood beams!

Tilt and Turn Doors with Pleated Shades

 

Congratulations once again to Team Alberta for all of their hard work and genuine passion for high-performance, energy-efficient design and building. It was a pleasure working with you and cheering you every step of the way! See you in 2015!

 

+ For more information on Borealis, click here

+ For more information on the Innotech products in Borealis, click here

10/8/2013

Team Alberta, 2013 Solar Decathlon

Two years of creating, designing and building a solar-powered home has come down to these 10 days of competition! Team Alberta, pictured above with Borealis, is currently in Irvine, California for the much-anticipated 2013 Solar Decathlon.

 

We've been closely following all of the excitement on Team Alberta's Facebook page and Twitter feed. And if all the buzz is to be believed, it sounds like our windows and doors are the talk of Borealis:

 

Thanks to @InnotechWindows for providing us with one of the most intriguing and talked about features in Borealis! #AlbertaSD #sd2013

— Stephanie Stobart (@MsThrillz) October 7, 2013

 

You can support Team Alberta by voting online for the People's Choice Award. It takes less than a minute to show your support to a dedicated team of students who have spent hours helping make Borealis the hit that it is. 

10/4/2013

University Pointe

 

The National Association of Home Builders (NAHB) recently held their annual ceremony for the Multifamily Pillars of the Industry Awards, which highlight creative development concepts, innovative financing strategies, great design, and superior management and marketing in the apartment and condo marketplace. This year Innotech was very proud to be associated with two projects nominated under the category of "Best Example of Green Building Concepts"; Expo Apartments in Seattle, and University Pointe at College Station in Portland. 

 

Beating out stiff competition from all across America, University Pointe was crowned the winner. LEED Gold certified, the student housing building was cited for its unique high density planning, green roofs, integration with local public transit, and its energy efficiency. Innotech supplied over 1800 windows to the project, which was completed under very stringent timelines.

 

Congratulations to our partners on the project, American Campus Construction, SERA Architects, and Walsh Construction for coming together to create such an amazing award-winning student residence.  

 

+ Read our project profile for University Pointe

+ Watch the nomiation video to learn more about all the projects

 

CATEGORY:
10/1/2013

The Ridge in Kaslo, British Columbia is nearing completion! Built and designed by EcoCentric Design, The Ridge is a sustainable private residence on the shores of Kootenay Lake overlooking the majestic Kootenay Rockies.

 

The project features triple glazed Innotech windows and exterior doors in charcoal exterior and interior finish. The home has numerous extra large openings to take full advantage of the views. Custom shapes, combinations and creative placement of the windows throughout the home also make this home an architectural gem. 

 

Here are a few photos of the project taken this year throughout the building process. We'll be taking professional photos next year once the landscaping is complete and the sunny weather returns. Stay tuned!

 Private Residence, Kaslo, BC

Private Residence, Kaslo, BC

Private Residence, Kaslo, BC

Private Residence, Kaslo, BC

Private Residence, Kaslo, BC

Private Residence, Kaslo, BC

Private Residence, Kaslo, BC

Private Residence, Kaslo, BC

 

For more images, visit EcoCentric Design's blog

 

Images courtesy of EcoCentric Design. 

 

9/14/2013

Department G, the Canadian Home Builders Association of British Columbia's environmental stewardship division, has announced the finalists for the 2013 department g Awards. The awards recognize sustainable building for single family homes in BC.

 

Sidney by the Sea 

 

The Innotech-supplied project 'Sidney by the Sea' is one of the finalists! The stunning West Coast style home was built by award-winning Coastal Construction. The home is a BUILT GREEN® Platinum certified oceanfront home. Designed by the homeowner, one of the home's most striking features is the expansive window and door wall seen above that overlooks the Pacific Ocean. Learn more about the project here.

 

+ For more information about the department g Awards, click here

+ For photos of all the 2013 department g Awards finalists, click here

9/4/2013

Sarah Nettleton Architects, Home #9 AIA Minnesota, Homes by Architects

 

We love Home #9!

 

The AIA Minnesota Homes by Architects Tour is an exciting opportunity to tour beautiful homes in Minneapolis and St. Paul designed by talented architects. This year, home #9 of 23 is one of the highlights of the tour. 

 

Designed by Sarah Nettleton Architects, the LEED-certified, 4,000 square foot home is a mix of good design and sustainability. The home features triple glazed Innotech Tilt + Glide Doors and Terrace Swing Doors in a custom painted dark grey finish supplied by our local dealer Heritage Window and Door

 

+ For more information about Home #9 and the Homes by Architects Tour, click here

+ View additional photos of Home #9 on Houzz.com

 

CATEGORY: