Downloads
 |
Standard
Details |
Current version: 2.50
Released: November 11, 2008
A full version history can be found on page 4 of the
PDF file.
Download
PDF (8.2MB)
The PDF file contains the complete detail library
in an easy-to-browse, printable form.
Download
ZIP file (2.9MB)
The ZIP archive contains the details as separate AutoCAD
2000 metric DWG files.
|
Typical Interface Details |
These details show typical West Coast installation methods for installing Innotech InnoNova windows to stud walls faced with stucco, brick, and metal panel siding.
|
Rainscreen
Wall Moldings |
|
Test
Summaries |
|
Frame
and Sash Size Limitations |
This fact sheet describes minimum and maximum size
and weight limitations for fixed glass frames and operable
sashes.
|
Hardware
Finish Options |
Operating handles and hinge covers are available in
a variety of finishes and colors to complement every
frame finish.
|
Window
Handle Mounting Heights |
Window handles for operating handles are typically
mounted at the midpoint of a sash, but an alternate
position is available when a lower mounting height is
desired.
|
Door
Clear Opening Sizes |
Building codes specify minimum clear opening widths
for certain doors. This fact sheet shows you how to
determine clear opening widths for InnoNova hinged doors
opened to 90 degrees.
|
Anchoring
Instructions |
Proper frame anchoring is the key to a successful installation.
As Innotech products are installed differently most
window and door products, installers must refer to the
Innotech anchoring instructions before starting an installation.
Incorrect installation may void the product warranty.
|
Preparation
for Field Testing |
Before a contractor administers a field test, an Innotech
representative should be contacted to ensure the windows
or doors are properly installed, cleaned, and adjusted
— otherwise they are not ready for a field test.
|
Final
Cleaning Instructions |
Protect your window and door investment by making sure
the contractor's final cleaning practices are in keeping
with these instructions. The instructions address the
cleaning of both glass and vinyl, as well as lubricating
of gaskets and hardware.
|
Innotech
Warranty Policy |
Innotech products are backed by a long and solid warranty
for your peace of mind.
|
Measuring
Screen Sizes |
Replacement screens are available for your Innotech
windows and doors, and you can measure the screen size
yourself following one of thsee instruction sheets.
|
Hardware
and Roll-away Screen Installation |
Installing roll-away screens and other hardware is
not difficult, but needs to be done correctly to maintain
warranty protection.
|
Removing
Baked-On Protective Film |
When protective film is not removed promptly after
installation, it can become difficult to remove without
damaging the frames. This procedure describes the safest
ways to attempt such removal.
|
